Patterned Screen / Divider
Draws a patterned screen or room divider with a solid border from the panel size; 8 patterns, adjustable density and web thickness.
What does it do?
Draws a patterned screen or room divider with a solid border from the panel size; 8 patterns, adjustable density and web thickness.
Runs on Alphacam Router / Designer; installed with a single .exe.
Values asked
- Panel width and height (mm)
- Solid border allowance (mm)
- Pattern (8): 8-point star, Voronoi organic cells, hexagonal honeycomb, gradient acoustic holes, Moroccan quatrefoil, diamond / tile, Japanese kumiko / asanoha, intersecting rings
- Number of columns (pattern density)
- Web thickness between cells (mm)
How to use it
- On the GMacros tab press the GMacros Decor button and pick Patterned Screen / Divider from the palette.
- Enter the panel size and the solid border allowance, choose the pattern.
- Enter the number of columns and the web thickness, then confirm.
Result
The outer frame and the inner cut-outs are drawn on separate layers. It does not add bridges (tabs); you add them in Alphacam when you set up machining.
Which package includes it?
This tool is part of:
GMacros Decor
4 tools for decorative wall, ceiling and furniture work: wavy baffle slat walls/ceilings, kerf bending (U-shaped counters, column cladding, L corners), patterned screens/dividers and photo engraving (halftone). One button on the GMacros tab in Alphacam; the tool is picked from the palette. The tools prepare the geometry to be cut; machining you define in Alphacam as usual.
Product page and price
Other tools in the same package
Try it first
Get a free trial key to run the tools on your own drawing.