Skip to content

Nesting software for CNC routers

The nesting tool in GMacros CADCAM places your parts, with their quantities, on MDF, chipboard or plywood sheets. In the same program you set up the operations, check the toolpath in simulation and get the NC code for your CNC router; no files are passed between separate drawing, nesting and cutting programs.

Try it freeSee GMacros CADCAM

How it works

  1. Draw the parts, create them with the door and cabinet macros, or open them as DXF.
  2. Enter the quantity of each part and the sheet size and thickness.
  3. Set the part spacing and edge margin; the program suggests a spacing from the diameter of the cutting tool.
  4. Press Nest; the sheets open side by side in the drawing area with their fill rates, and your drawing stays in place.
  5. Open any sheet, set up the operations and get the NC code.

What can be set?

How it differs from panel-saw optimisation

Good to know

FAQ

Is nesting the same as panel optimisation?
Both terms are used for arranging parts on a sheet. GMacros CADCAM nests parts that are cut on a CNC router; it does not prepare cutting plans for a panel saw.
Can curved and free-form parts be nested?
Yes. The program fits curved parts into each other's gaps for a tight layout.
Can I keep the grain direction?
Yes. Per part you can turn rotation off, limit it to 90° or tick “Grain direction”; a ticked part only turns 0° or 180°.
Can I use a leftover offcut sheet?
Yes. Draw the shape of the leftover sheet or open it as DXF, select it and choose “Convert to sheet”; parts are nested inside that shape.
Can I try nesting for free?
Yes. The 7-day trial is free and unlocks sheet nesting.
WhatsApp