Skip to content

CNC simulation software

GMacros CADCAM shows the job on screen before you send it to the machine: you see the path the tool follows on the drawing and the material removal in 3D. A wrong depth or a forgotten operation shows up on screen, not on the workpiece; then you get the NC (G) code in your machine's format.

Try it freeSee GMacros CADCAM

What the simulation shows

From simulation to G-code

  1. Draw the part, create it with a macro, or open it as DXF.
  2. Set up the operations and tools with “Auto setup”; edit them if needed.
  3. Check the job in simulation.
  4. Get the NC output: Elfamak TORRO (Siemens Sinumerik), Siemens 840D/828D, Syntec, OSAI, Weihong NcStudio and generic ISO formats.

What the program checks itself

Good to know

FAQ

Is the simulation free?
Yes. Drawing, toolpath preview and 3D simulation work without a membership.
Does the program write the G-code?
Yes. NC (G) code in your machine's format is generated from the operations you set up; you do not write code by hand.
What if my machine is not listed?
Choose by controller or import your machine's Alphacam post (.arp). If that does not work, send us your machine model and a sample NC file.
Is it suitable for CNC training?
Yes. Students watch the machining on screen before it reaches the machine.
WhatsApp